Connecting The Water Lines - Kenmore Elite 796.3142 Use & Care Manual

CONNECTING THE WATER LINES

IMPORTANT:
IMPORTANT:
Kenmore
116
Rubber Seal
Water Hose
(to water inlet
on washer)
1.
Water Faucet
2.
Rubber Seal
Water Hose
(to tap)
INSTALLATION INSTRUCTIONS
3.
4. Attach the (red) hot water line to the hot water inlet on
the back of the washer. Attach the (blue) cold water
line to the cold water inlet on the back of the washer.
all the way and check for leaks at both ends of the
hoses.
NOTE:
property damage from leaks.
9
Hot
Cold
Turn ON both faucets