entire Use & Care Guide, including the Important Safety Instructions, before operating this washer.
CONTROL PANEL FEATURES
POWER (ON/OFF) BUTTON
Press to turn the washer ON. Press again to turn
the washer OFF. Pressing the POWER button dur-
ing a cycle will cancel that cycle and any load
settings will be lost. The lid will unlock after a
CYCLE SELECTOR BUTTON
Press the cycle button to select the desired cycle. Once
the desired cycle has been selected, the standard pre-
sets will appear in the display. These settings can
be adjusted using the cycle setting buttons any time
before starting the cycle.
NOTE: To protect your clothing, not all settings are available on all cycle selections.
HOW TO USE
Press this button to start the selected cycle.
If the washer is running, use this button to pause the
cycle without losing the current settings.
CYCLE MODIFIER BUTTONS
Use these buttons to adjust the settings for the se-
lected cycle. The settings light up above the
buttons to show the current selection.
SPECIAL CYCLE AND OPTION BUTTONS
These buttons allow you to select special cycles or
TIME AND STATUS DISPLAY
The display shows the cycle status and estimated