Maintenance - Fluke 4181 User Manual

Maintenance

5 Maintenance
The instrument has been designed with the utmost care. Ease of operation and simplic-
ity of maintenance have been a central theme in the product development. Therefore,
with proper care the instrument should require very little maintenance. Avoid operat-
ing the instrument in an oily, wet, dirty, or dusty environment.
Ice will build up on the target surface over a period of time, see see Section 3.4.3
Removing Ice Buildup on the Target on page 17.
If the outside of the instrument becomes soiled, it may be wiped clean with a damp
cloth and mild detergent. DO NOT use harsh chemicals to clean the instrument, which
may damage the paint. DO NOT wipe the front plate (target).
It is important to keep the target surface of the instrument clean and clear of any
foreign matter. Always utilize the target cover when the instrument is not in use and
during transport.
The instrument should be handled with care. Avoid knocking or dropping the
instrument.
If a hazardous material is spilled on or inside the instrument, the user is responsible
for taking the appropriate decontamination steps as outlined by the National Safety
Council with respect to the material.
If the mains supply cord becomes damaged, replace it with a cord with the appropri-
ate gauge wire for the current of the instrument. If there are any questions, contact an
Authorized Service Center (see Section 1.6 Authorized Service Centers on page 7) for
more information.
Before using any cleaning or decontamination method except those recommended by
Hart, users should check with an Authorized Service Center (see Section 1.6 Autho-
rized Service Centers on page 7) to be sure that the proposed method does not damage
the equipment.
If the instrument is used in a manner not in accordance with the equipment design, the
operation of the instrument may be impaired or safety hazards may arise.
23