Playback: Tag - Swann PRO-SERIES HD Instruction Manual

Playback: Tag

Tag Playback will
isolate events based 23-11-2015 08:24:47 Mon
on the Tag information
that has been applied
to a particular video.
In both Normal and
Event Playback modes,
you can apply Tags to
what is happening on-
screen. For example,
each time a particular
person appears within
the video, you can add a
Tag to make it easier to
search and find videos
with that person.
1 2 3
1. Mute:
Mutes audio playback.
2. Start clipping:
This button allows you to set mark in and out points on
your video which you can then export to a USB storage device such as a
flash drive. When you have selected a video to play, press this button at
the mark in point and press it again at the mark out point.
3. Save clip(s): Click this to save your clip(s) to a USB storage device. Al-
ternatively right-click the mouse to exit then click "Yes" to save. Select
the save location then click "Export". Click "OK" to confirm.
4. Tag management:
This allows you to edit or delete tags that you have
added to the video.
4 5
Camera 01
6
5. Zoom In:
Click this to enter digital zoom mode. Click the video then
use the PIP (picture-on-picture) screen on the bottom right to select a
different area to zoom in to. Right-click to exit.
6. Play controls:
These are your play, pause, rewind, forward, previous
day and next day controls.
7. Zoom In/Out: Zoom in and out of the timeline for precise control.
Select from one or more
camera(s) that you would
like to search on. Input the
Tag name (be careful as it
is case sensitive), select a
start time & date and end
time & date then click the
"Search" button. A list of
videos fitting your search
criteria will be shown.
Double-click a file to play.
Click the "Back" button to
search again.
7
31