Camera: Ptz - Linear Scan - Swann PRO-SERIES HD Instruction Manual

Camera: PTZ - Linear Scan

1. Use the Left PTZ control to move the camera to the desired location
where you want to set the limit then click "Left Limit".
2. Use the Right PTZ control to move the camera to the desired location
where you want to set the limit then click "Right Limit".
PTZ:
Click this button to access the full PTZ controls available. To ac-
cess the Linear Scan function, click the triangle button until you reach
the "One-touch" menu (see above). Click "Linear Scan" to start. The
camera will move horizontally from left to right according to the limits
that have been set.
Click the "X" button to close the PTZ controls when finished.
Click "Stop" to stop the Linear Scan.
• Click the "Back" button to go back to the Menu.
26-05-2015 9:30:15 Tue
1
Camera 01
2
Click the triangle button until you
reach the "One-touch" menu.
22