Table of Contents
Advertisement
A
DMINISTRATION OF THE
6.5
Pulse Time for Minute Lines 01 / 02
For pole-changing pulse operation.
The pulse time can be extended for slow-acting clockworks (e.g. due to large, heavy
pointers). The pulse time can be adjusted between 0.2 and 3.0 seconds in steps of 0.1
seconds.
Pulse times 01 and 02 for minute lines are activated with the ENT key after Parameter
Byte 03.
B . 7 4 0 6
The selected line number 01 or 02 and the associated currently set pulse time are displayed
on the top line.
The pulse time is re-entered on the second line (between 0.2 sec and 3.0 sec). The pulse
time entered must be confirmed by pressing the ENT
6.6
Menu Procedure for Setting Lines
For pole-changing pulse operation.
The slave line time and the RUN/STOP status of the individual lines can be checked and re-
set in the main menu SPECIAL-BOARD-TIME:5.
B . 7 4 0 6
Use key N to search for the Board 7406RC to be manipulated and select with the Y
key.
The following image appears on the display:
B . 7 4 0 6
S T : R
st
1
Row:
Selected Board 7406RC, Number 02, Name " LINE 4-5 "
L:1/2
7406RC Slave Clock Control Board for System 7001RC - V02.03
hopf
Elektronik GmbH
Nottebohmstr. 41 • D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: info@hopf.com
B
7406RC
OARD
Pulse times that are too short on slow-acting clockworks can cause faulty
time transfer on individual clocks in the line. For this reason the pulse time
is adjusted for the slowest-acting clock in the line.
N O . : 0 1
L I N I E
The pulse time of the second lines is not adjustable; this is fixed at 0.2 sec.
N O . : 0 1
B O A R D N A M E : " L I N I E
N O : 0 2
B O A R D N A M E : " L I N E
T : 1 2 . 5 6 . 5 6
Input and display of the Slave Line number of this Board
7406RC
0 1
P U L S E
N E W
P U L S E
key.
N E W
S T : ~
N E W
> 0 , 2 < S E C
> ~ , ~ < S E C
"
Y / N
4 - 5 " L : 1 / 2
T : ~ ~ . ~ ~ . ~ ~
21 / 27
Advertisement
Table of Contents
