Table of Contents
Advertisement
A
DMINISTRATION OF THE
6
Administration of the Board 7406RC
The 7001RC base system manual serves as the basis for configuration. The following will
cover only the inputting of the values that can be found under the
heading.
6.1
Input Functions for the Board 7406RC in the System 7001RC
The input and display functions of the board parameters are polled in the menu heading
BOARD-SETUP:4
with ENT key
with 4 key
with N key
S E T
S Y S T E M - B O A R D S
Select with key Y
Search for board to be parameterized with key N and select with key Y .
Example:
P A R A M E T E R
S T A T U S : M / -
PARAMETER BOARD 03 OF 25 board 03 of 25 implemented
7406 NR.: 04
STATUS: M (I)/- (E)
BOARDNAME:"LINIE"
16 / 27
hopf
Elektronik GmbH
Nottebohmstr. 41 • D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: info@hopf.com
B
7406RC
OARD
In order for the system 7001RC to accept the newly configured parameters,
is the configured menu and the following parameter menu of SET SYSTEM-
BOARDS PARAMETER menu be confirmed by pressing the ENT key.
Main menu
Board setup
Scroll to menu heading:
B O A R D
0 3
B O A R D N A M E : " L I N I E
board type 7406RC with board number 04
M or I = monitoring or no monitoring
– or E = without error operating or board error
LINIE board name freely selected by customer
7406RC Slave Clock Control Board for System 7001RC - V02.03
BOARD-SETUP:4
P A R A M E T E R
O F
2 5
7 4 0 6
menu
Y / N
N O . : 0 4
S E T > Y /
"
N
N
Advertisement
Table of Contents
