Feathercraft aironaut Manual page 5

4.
Install Rim Inserts
Slide the two white plastic inserts
into pockets on the underside of
the coaming.
5.
Inflate Seat Bottom and Seat Back
• Push the short black filler hose into the pump fill adaptor.
• Open the twist valve by turning counter-clockwise.
• Push the filler hose over the valve and pump.
• Twist clock-wise to close. Remove filler hose.
• The seat is installed under the rim at the stern of the cockpit.
PRECAUTION : Deflate seat if leaving the kayak sitting in the sun!