Advertisement
Aironaut Use & Precautions
The fabric used to make the Aironaut is a robust urethane fabric and is very abrasion resistant.
However, care must be taken when approaching and launching from sharp and jagged shores.
Precaution:
Using the sea sock at all times will greatly inhibit water from entering the boat. If water does flood
the boat, drain the boat of ALL water BEFORE opening the boat valves to deflate. To deflate, open
the boat valves and roll skin to exhaust the air. Be sure to then CLOSE the valves (1/4 turn count-
er-clockwise) once skin is deflated and ready for final rolling for transport.Do not allow water to
enter the air panels, as this may cause the inner chamber welds or pressure relief valve to fail.
Should a failure occur under these circumstances, the warranty is Null and Void.
A One Year Limited Warranty covers manufacturing flaws or defects. The warranty does not cover
failure due to improper use or care.
Should water enter the air panel, ( such as due to a puncture ) the following instructions illustrate
how to empty the chamber. Then allow the boat to dry completely.
Advertisement
