Advertisement
3.
To Inflate
• There is a yellow "poppit" in the boat valve.
• To deflate the kayak push the poppit down and
turn clockwise.
• To inflate the kayak, rotate it counter-clockwise
and release. It will pop up. Make sure that the
poppit is in the "UP" position.
• Remove the short black hose from the pump fill
adaptor.
• Attach the fill adaptor on the pump to the valve
by turning clockwise ¼ turn.
• Pump up the hull chamber. The hull should feel
fairly firm. This takes about one minute of steady
pumping. Each chamber has a pressure release
valve. It will release air if you keep pumping.
• Pump up the two sides. The sides take less time
to inflate.
Caution: When rolling the skin, do not force the valves
against the inside of the skin. The hard plastic of the valve
can damage the skin.
Yellow Poppit
Fill Adapator
Short Hose
Advertisement
