Accorroni MEC MIX C Technical Information page 17

Weekly programme
Press the [PROG] button to start the weekly
programming. By the encoder, select the day of the
week and press [OK] to enter the setting.
Select the time for starting by means of the encoder,
press [OK] to confirm and then select the temperature
level desired from this time; press [OK] to confirm and
then select the time extension for this temperature
and press [OK] to confirm. Repeat for setting other
temperature levels and time. It is possible to return
back without leaving the programming mode and
Indication of the day
1= Monday........7= Sunday
Status of the generator
OFF- Summer/winter
Holidays
display liquid
crystals
Selector
functions
chrono/boiler
Button
ON-OFF
Anti frost
Button
maintenance
Button not used
DESCRIPTION DISPLAY
Indicators multi function: time, temperature, error codes
Anti frost
ILLUSTRATION OF THE COMMANDS
17
keeping the already set parameters.
Then press [PROG] to return to the selection of the
day of the week. By holding pressed the [OK] button
the lighted day programme will be copied to the next
day of the week.
Press [AUTO] to leave the programming mode
or hold pressed the [PROG] button.
Manual Flame and Block
Anomaly
Communication
Graphic daily programming
Fig.6
Button comfort
Encoder
Reset of memory
RESET
Programming
Button comfort
Fig.7