Configuration
Setting the RF Transmit Status
This setting can block a unit (or link) from carrying data traffic. It is used to disable units and to discontinue
service to customers, if necessary.
➧
To set RF transmit status
1. From the Main Menu, select RF Station Configuration and press
Configuration menu is displayed.
H - Help
Operating Mode
RF Transmit Status
Link Monitor Period (0=OFF, 1-10000)
Test Mode Timer Minutes (1-1000)
Base Station Only Parameters
Maximum Remote Distance
Link Monitor Remote Station Rank
Remote Station Only Parameters
Throttle Enable
Throttle Level (1-100)
CIR Weight (1-5)
Output Power Control Mode
User Output Power Adjust Ceiling
Signal Margin (6-31) dB
Current Output Power Level Adjust
2. Select RF Transmit Status and press
3. Select a setting.
unblocked
blocked
4. Press
.
Enter
5. Press
to exit to the Main Menu.
Esc
80
RF Station Configuration
. The data field highlights.
Enter
Unit passes data in both directions (default setting)
Does not pass data in either direction
. The RF Station
Enter
Normal Mode
-> unblocked
0
5
5 Km
1
off
1
1
off
-5
dB
15
-21
AWE 120-58 Ultima3 Series User Guide