Stopping The Machine; Tools And Accessories; Weights; Tool Holder Key - lavina 21-X User Manual

Superabrasive User Manual Original Language Lavina® 21-X 4/2015

STOPPING THE MACHINE

The stopping of the machine must be done gradually until the motor stops. Do not stop moving the machine before arresting
the motor as the tools could damage the surface. To stop push the emergency/stop button (3).
Remember not to hold the machine in one spot before turning off the motor.

5. TOOLS AND ACCESSORIES

WEIGHTS

Figure 5.1
Superabrasive offers four additional weights of 18.5 lbs or 8 kg (Fig.5.1) item number L21-50.00.00.The weights stacks on
the 3 posts around the outer bowl (Fig.5.2) or on top of each other (Fig.5.3).
The additional weights depend on the tools; it is not always possible to add weights. Some tools work too aggressively and
the machine can stop.

TOOL HOLDER KEY

The tool holder key (Fig. 5.4) is used for adjusting, mounting and dismounting of
the foam plates. Always use the key for mounting. Item number is A03.00.00.00
Figure 5.4

FOAM PLATE

Diamond tools with Velcro are mounted on the foam plate 7"(Fig.5.5). The foam plate is
mounted on the "QuickChange" System.
Item number is LV-7-FP-S
Figure 5.5

SECURITY PLATE FOR QUICKCHANGE PADS

Plate used to ensure the "Quickchange" pads. Item number is A38.00.04 (Fig.5.6)
Figure 5.6
11