Cisco Catalyst 3560-X Software Configuration Manual page 399

Hide thumbs Also See for Catalyst 3560-X:

Table of Contents

C H A P T E R

Cisco TrustSec

Cisco TrustSec provides security improvements to Cisco network devices based on the capability to

strongly identify users, hosts, and network devices within a network. TrustSec provides topology

independent and scalable access controls by uniquely classifying data traffic for a particular role.

TrustSec ensures data confidentiality and integrity by establishing trust among authenticated peers and

encrypting links with those peers.

The key component of Cisco TrustSec is the

Cisco Identity Services Engine

(ISE). Cisco ISE can

provision switches with TrustSec Identities and Security Group ACLs (SGACLs), though these may be

configured manually on the switch.

To configure Cisco Trustsec on the switch, see the Cisco TrustSec Switch Configuration Guide at the

following URL:

http://www.cisco.com/en/US/docs/switches/lan/trustsec/configuration/guide/trustsec.html

Release notes for Cisco TrustSec General Availability releases are at the following URL:

http://www.cisco.com/en/US/docs/switches/lan/trustsec/release/notes/rn_cts_crossplat.html

Additional information about the Cisco TrustSec solution, including overviews, datasheets, and case

studies, is available at:

http://www.cisco.com/en/US/netsol/ns1051/index.html

lists the TrustSec features to be eventually implemented on TrustSec-enabled Cisco switches.

Successive general availability releases of TrustSec will expand the number of switches supported and

the number of TrustSec features supported per switch.

"Configuration Guidelines and Limitations" section on page 1-3

for more information about the

limitations of TrustSec features on Catalyst 3750-X and Catalyst 3560-X switches.

Catalyst 3750-X and 3560-X Switch Software Configuration Guide

Troubleshooting

Catalyst 3750-x