Conferencing Calls - Teo 7810 User Manual

C o n f e r e n c i n g C a l l s
C o n f e r e n c i n g C a l l s
You can initiate multi-party conference calls. Conferences are
limited to 3 parties.
Conferencing a New Call
Press the CONF key while on an active call.
The current call is placed on hold and an idle line
appearance is automatically selected.
Dial the party you wish to add to the conference
(page 7), and then select SEND or press the OK key.
After the added party answers, press the CONF key
to conference all parties together.
Conferencing a Held Call
Press the CONF key while you are on an active call
with another call on hold.
The current call is placed on hold and an idle line
appearance is automatically selected.
Press the Line Appearance key for the held call you
wish to add to the conference.
Press the CONF key to conference all parties
together.
Dropping the Last Party
Press the DROP key to remove the last party added.
Teo IP Phone 7810 User Guide
Disconnecting from a Conference
Replace the handset, press the SPKR key when
using the speakerphone, or press the HEADSET key
when using a headset to remove yourself from a
conference.
Other parties in the conference may or may not remain
connected, depending on system configuration.
11