General Operation - Dual XD230M Installation & Owner's Manual

XD230M OPERATION
General Operation
Power On/Off
Press POWER or any other button (except eject) to turn the
unit on. Inserting a disc will turn the unit on automatically.
Press POWER to turn the unit off.
Mode
Press MODE to select between Tuner, CD player and
auxiliary input. Modes of operation are indicated in the
display.
Note: CD mode will not appear unless a CD is inserted.
Auxiliary Input
Insert 3.5mm plug to connect the headphone or line output
from your portable audio device.
Volume
Adjust volume using rotary encoder (00-46).
Programmable
To set the turn-on volume level, press and hold POWER
Turn-On Volume
for 3 seconds to store the currently selected volume level
in memory. "P-VOL" and the current volume level will
momentarily appear in the display. If no volume level is
programmed, the unit will remember the last volume level.
Mute
Press MUTE to silence the audio. "MUTE" will flash in the
display. Press MUTE again to cancel.
Preset EQ Curves
Press EQ to select between POP, JAZZ, CLASSIC, BEAT,
ROCK and OFF (default) equalization curves. Any adjustment
to the Bass or Treble settings automatically cancels the
current EQ curve (if one is selected).
Display Press DISP to select between clock and different types of
information, such as radio frequency or the CD track/elapsed
time information.
Set the Clock From Tuner or CD mode, press and hold DISP until the clock
nn
begins to flash, then release. Press TUNE to adjust
ll
the hours and TUNE to adjust the minutes. Press DISP
momentarily to save the selected time.
12/24-hour Clock The clock will display 12-hour time in USA frequency spacing
mode (10 : 00). In European frequency spacing mode, the clock
will display 24-hour time (22:00).
5