Num'axes Canicalm Spray User Manual page 14

Spray collar
Hide thumbs Also See for Canicalm Spray:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 12
– Wait for a short time, then turn your collar on by pressing on the red On/Off button in order to
trigger a spray (see Activate the collar).
- Blow on the hole located close to the serial number label 2 or 3 times in order to ensure the good
operation of the collar.
- Before finishing to fill the reservoir, check that the collar is turned Off.
– Turn the spray can upside down and insert the nozzle in the refill valve (spray refill in a vertical
position).
– Firmly push down on the spray can for 10 seconds then release.
There are about 25 sprays in each reservoir.
It is very important to refill the reservoir before the spray reservoir runs dry. Otherwise, your dog
understands that he can stop the sprays by barking during a certain amount of time and associates
barking with reward.
The spraying valve and microphone
have to be directed away from your body
(especially from your eyes).
Spraying valve
Microphone
WARNING
Gb - 14
Diagram 2
Hold the spray refill upside
down and in a vertical position
Refill valve

Advertisement

Table of Contents
loading

Table of Contents