Putting the HE 1 into operation | Connecting the headphone tube amplifier to a power amplifier or to active loudspeakers
24
Connecting the headphone tube amplifier to a power
amplifier or to active loudspeakers
You can use the tube headphone amplifier as a preamplifier and connect it to a
power amplifier or to active loudspeakers. To switch the audio output from the
headphones to the audio outputs, set the
Switch your audio devices off before connecting the tube headphone
▷
amplifier.
Select a suitable high-quality connection cable for your audio device. Please
▷
observe the recommended maximum cable length as given in the table.
To connect the tube headphone amplifier to your audio source, refer to the
▷
connection diagram suitable for your your audio source (see the following
chapters):
Connection possibility of the
audio device:
XLR-3 (BAL)
A
RCA (UNBAL)
B
OUTPUT
rotary switch to LINE.
Connection cable
Max. cable
length
2 balanced XLR-3
10 m
cables
Stereo audio cable with
2 RCA connectors at
5 m
each end
Page
25
25