Package Contents; Connecting The Headphones - Sennheiser HD 660S Instruction Manual

High-definition open-back headphones
Hide thumbs Also See for HD 660S:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 9
English | HD 660S

Package contents

1 HD 660S open, dynamic headphones
1 connection cable with 1/4" (6.35 mm) stereo
jack plug (connected ex works), unbalanced
1 connection cable with 4.4 mm stereo jack
plug, balanced
Your HD 660S
The HD 660S retains all the virtues of its legendary predecessor, the HD 650, but
also represents a decisive step forward technology-wise. Thanks to advanced
simulation possibilities, our engineers were able to further optimize the magnet
system and the shape of the diaphragm. The new transducers are meticulously
measured for each headphones and are hand-selected in pairs. In terms of sound,
the HD 660S sets a new benchmark in its class and masters the balancing act
between perfect control and fascinating musicality in a playful way. With powerful
bass, seductive timbres and breathtaking clarity, the HD 660S lets you experience
the pure joy of music. The Sennheiser HD 660S will inspire you.
A

Connecting the headphones*

Select the suitable connection cable and, if necessary, an adapter for your
audio source to which you want to connect the headphones, and change the
connection cable as described in section C:
• 1/4" (6.35 mm) stereo jack plug, unbalanced (can also be connected to a
3.5 mm stereo jack socket by using the supplied adapter)
• 4.4 mm stereo jack plug, balanced
• XLR-4, balanced (Sennheiser CH 650 S, optional accessory)
Connect the headphones to your audio source.
B
Putting on the headphones and using them*
Put on your headphones and then pull the ear cups down until they rest
comfortably over the ears. Make sure you wear them the right way round by
observing the "R" (right) and "L" (left) markings on the ear cup bands.
For optimum sound quality, ensure that the ear cups are not covered.
C
Changing the connection cable*
Make sure the "R" (right) and "L" (left) markings on the connectors match the
markings on the ear cups. The marking on the connectors must point outward.
Insert the connector until it locks into place with an audible click.
* Illustrations can be found on the fold-out pages.
2
1 stereo jack adapter
(1/4" (6.35 mm) to 3.5 mm)
1 instruction manual
1 storage box

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hd 660s2

Table of Contents