Overspeed Protection; Over-Temperature Protection; Slant Protection; Digital Bluetooth - InMotion SCV V8 User Manual

4.4. Overspeed Protection

INMOTION SCV V8 restricts the maximum driving speed to avoid the dangers caused by driving too fast. When the unicycle driving speed
comes close to the maximum speed set by the system, the pedal will slightly tilt up for 3~5° accompanied by alarm sound. Users must slow
down at this time. Do not accelerate forcibly (there is a risk of car crash if performing forced acceleration, the personal injuries and all losses
caused by failure to operate according to the specification shall be borne by the users themselves). The pedal will return to normal angle
once returning to normal speed.
When the electric quantity is less than 40%, the maximum speed limit will reduce gradually. When the electric quantity comes up to or is
lower than the minimum driving voltage (10%), the unicycle body will automatically tilt up the pedal to give the user the hint to stop
driving, otherwise it will cause damage to the unicycle.

4.5. Over-temperature Protection

INMOTION sets a protection mechanism to avoid excessive battery temperature when the unicycle operates under high load for a long
time. When the battery reach temperature limit, the unicycle will indicate overload and the pedals will turn up as well. Once power off the
unicycle, it is not able to turn on temporarily. Users are supposed to restart it for 15 minutes.

4.6. Slant Protection

When the left and right tilt angle of the unicycle body is more than 55° during driving, the system will induce the abnormality of the
unicycle body, and will automatically exit the self-balancing mode, so as to prevent the personal injuries caused by high-speed rotating
tires after the tilting of the unicycle body. In the meantime, the unicycle will play the prompt tone. It is only necessary to right the unicycle
body at this time to automatically enter the self-balancing mode.

4.7. Digital Bluetooth

INMOTION SCV is equipped with built-in digital Bluetooth 4.0 BLE module, which is used for interacting with the vehicles connected with
the INMOTION APP.
The name of the Bluetooth 4.0 BLE of INMOTION SCV is V8-XXXXXXXX. XXXXXXXX refers to the last 8 digitals of the product serial number.
11