C.A. Technologies Panther 100G Product Information

Recommend Air Caps for Adhesives:
21-2263 (1.3 - 1.8 setup)
21-2266-3T (1.3 - 1.8 setup)
21-2167 (2.2 setup)
21-2168 (2.8 setup)
CONVENTIONAL AIR CAP AND FLUID NOZZLE CHART
MODEL PRESS /
AIR CAP
NO. SIPHON
21-2166
21-2266
21-2266T
Siphon
21-2366
21-2466
21-2467
21-2268
21-2163
P100G
21-2263
21-2266-3
21-2266-3T
Pressure
21-2167
21-2267
21-2168
21-2766B
21-200**
Internal Mix
21-2201**
Actual fluid nozzle and air cap combinations are determined by application (see application chart page 4)
*Gun inlet pressures may vary as required by application
**200 Air cap requires P/N 21-1583 base & 21-1584 ring
Coating Atomization Technologies 337 South Arthur Avenue, Louisville CO 80027 Phone: 888.820.4498, Fax: 303.438.5708
FLUID TIP FAN
RANGE CONTROL
0.6 - 1.8
0.6 - 1.8
0.6 - 1.8
0.6 - 1.8
0.6 - 1.8
2.2
2.8
0.6 - 1.8
60-1500
0.6 - 1.8
0.6 - 1.8
0.6 - 1.8
2.2
2.2
2.8
1.0 - 1.8
1.5 - 1.8
2.2
www.spraycat.com
P P P P P ant ant ant ant her 1 her 1 her 1 00G her 1
ant her 1
TEFLON COATED SPRAY GUN
AIR CAP AVAILABLE FLUID
SCFM
RING
5
12 17-4PH STAINLESS
12 31-0606 0.6mm (.022")
12 31-0607 0.7mm (.028")
15 31-0610 1.0mm (.040")
15 31-0612 1.2mm (.046")
15 31-0613 1.3mm (.052")
8 31-0615 1.5mm (.059")
included
14 31-0618 1.8mm (.070")
16.2 31-0622 2.2mm (.086")
16.2 31-0628 2.8mm (.110")
14.5
15
14 31-0618V 1.8mm (.070")
8 31-0622V 2.2mm (.086")
5.2 31-0628V 2.8mm (.110")
5.2
00G 00G 00G
00G
PRODUCT INFORMATION
NOZZLES marking on needle
300 STAINLESS
40-1107 (107)
40-1110 (110)
40-1115 (115)
40-1122 (122)
40-1128 (128)
CARBIDE
NEEDLES /
CARBIDE
40-6201
40-6201
40-6201