Parameter Settings; Selecting And Altering Parameters - Pfaff Element 1050 series Supplement To Instruction Manual

5

Parameter settings

.03
5

Selecting and altering parameters

.03.01
Switch on the machine.
Press the TE/Speed key to call up the parameter input function.
No
By pressing the corresponding +/- keys, select the desired parameter group, e.g. "600".
No
By pressing the corresponding +/- keys, select the desired parameter, e.g. "660" for the
bobbin thread monitoring function.
VAL
By pressing the corresponding +/- keys, set the desired value for the selected parameter,
e.g. "2" for the "bobbin rest thread counter on" function.
By pressing the TE/Speed key the value is taken over and the machine changes to the
sewing mode.
TE
No VAL
A 101 ON
TE
No
600
TE
No VAL
A 660 1
TE
No VAL
A 660 2
Adjustment
5 - 3