Positioning And Connecting; Included With The Appliance; Safety Instructions - Bosch WAT SERIES Instruction Manual And Installation Instructions

Positioning and connecting

en
5
Positioning and
connecting

Included with the appliance

P o s i t i o n i n g a n d c o n n e c t i n g
Check the machine for transport
Note:
damage.Never use a damaged
machine. If you have any complaints,
contact the dealer from whom you
purchased the appliance or our
customer services. ~ Page 27
Mains cable
(
0 Bag:
Installation and operating
■
instructions
Customer services location
■
directory*
Warranty*
■
Cover caps for openings after
■
the transport braces have
been removed
8 Water supply hose on AquaStop
models
28
@ Water drain hose
H Elbow for securing the water
drain hose*
P Cold water supply hose for
models standard/Aqua-Secure,
for models with hot water
connection additionally a hot
water supply hose
* depending on the model
In addition, a hose clamp (24 - 40 mm
diameter, available from specialist
dealers) is required to connect the
water drain hose to a siphon.
Useful tools
Spirit level for aligning
■
Spanner with:
■
– WAF13 for loosening the
transport braces, and
– WAF17 for aligning the appliance
feet

Safety instructions

:
Warning
Risk of injury!
The washing machine is very heavy.
■
Be careful when lifting/transporting
the washing machine.
When the washing machine is lifted
■
by its protruding parts (e.g. the
washing machine door), the
components may break off and
cause injuries.
Do not lift the washing machine by
protruding parts.
If the hose and mains cables are not
■
routed properly, there is a risk of
tripping and injury.
Lay hoses and cables in such a way
that there is no risk of tripping.
Caution!
Damage to the appliance
Frozen hoses may rip/burst.
Do not install the washing machine in
areas exposed to frost or outdoors.