Disposizioni speciali: Misurazioni Representative in the Union: Patrick Vervier, Stanley Dubuis 17-19, rue Jules Berthonneau-BP 3406 41034 Blois Cedex, France. Vertreter in der Union/Représentant dans l’union/Representante en la Union/Rappresentante presso l’Unione Done at/Ort/Fait à/Dado en/Fatto a Stanley Hydraulic Tools, Milwaukie, Oregon USA...
REPAIRS AND / OR SERVICE TO THIS TOOL MUST ONLY BE DONE BY AN AUTHORIZED AND CERTIFIED DEALER. For the nearest authorized and certified dealer, call Stanley Hydraulic Tools at the number listed on the back of this manual and ask for a Customer Service Representative.
Always observe safety symbols. They are included for your safety and for the protection of the tool. LOCAL SAFETY REGULATIONS Enter any local safety regulations here. Keep these instructions in an area accessible to the operator and mainte- nance personnel. 4 ► SRP 2240 / 3860 User Manual...
Also observe the corresponding rules and regulations valid in your country. Always comply with the safety provisions in your county and state. Stanley is not liable for the function of the machine when used in an improper manner and for other than the intend- ed purpose.
SAFETY This Stanley machine has been built according to the state of the Safety information contained in the operating and maintenance art in compliance with the pertinent rules. Nevertheless, these instructions machines can still constitute a hazard to persons and property if: The following terms and symbols are used in this operating •...
Hydraulic oil discharging under pressure can cause serious injuries. Work on hydraulic devices must be undertaken only by persons with a special knowledge of hydraulics and the necessary experience! SRP 2240 / 3860 User Manual ◄ 7...
DIRECTIVES AND STANDARDS: EN 500-4 / DIN EN ISO 5349 1) AS THE PERMISSIBLE RATING SOUND LEVEL OF 85 DB (A) CAN BE EXCEEDED BY THIS MACHINE, OPERATORS MUST WEAR HEARING PROTECTORS. SRP 2240 / 3860 User Manual ◄ 9...
The machine is guided at the tow-bar grip. It is operated with the operating controls on the tow-bar. The SRP 2240/3860 is suitable for all compaction work in the fields of civil engineering and road construction. It can be used to compact all ground materials such as sand, gravel, slag, crushed stone, asphalt and composite sett paving.
Page 11
Locking the tow-bar In case of loading and transport the tow-bar (1) has to be locked in an upright position by turning up the locking bolt (3). SRP 2240 / 3860 User Manual ◄ 11...
Page 12
Return it gently to prevent Important damage to the starter. • Set the engine speed lever (1) to MIN. If the motor doesn't start, set the throttle lever about 1/3 of the way to «MAX». Important 12 ► SRP 2240 / 3860 User Manual...
Page 13
• Turn the engine switch (4) to the «OFF» position. position to start the engine, gradually move it to the «OPEN» position as the engine warms up. • Turn the fuel valve lever (2) to the «OFF» position. SRP 2240 / 3860 User Manual ◄ 13...
Page 14
For compaction of paving stones, it is recom- mended to use Vulkollan plates and protec- Important tive brackets (special accessories) to prevent damages to the compaction material and to the machine. 14 ► SRP 2240 / 3860 User Manual...
Be careful when raising and lowering the machine. Do not place your feet under the raised base plate. Danger Danger of foot injuries! • Remove the undercarriage (2) from the mounting bracket (3) and place it on the floor. SRP 2240 / 3860 User Manual ◄ 15...
Page 16
• Using the towing bar, tilt the machine backwards until the machine is horizontally seated on the undercarriage. The device is ready to be moved. • After transport hook the undercarriage back into position by proceeding in reverse order. 1)Special equipment 16 ► SRP 2240 / 3860 User Manual...
• Change hydraulic oil • Check the hydraulic hose lines ²) • • Check V-belt • • Check screwed connections for tightness )See engine operating manual )or annually )for the first time SRP 2240 / 3860 User Manual ◄ 17...
Page 18
500 h or API SG-CE annually SAE 10W40 SRP 3860 1.0 l 2. Hydraulic SRP 2240 0.17 l Hydro-Oil Not Necessary HVLP 46 SRP 3860 0.65 l Alternative Lubrication Schedule 18 ► SRP 2240 / 3860 User Manual...
Page 19
– Add fuel to the bottom of the maximum fuel level limit of the fuel tank. Do not overfill. Use unleaded automotive gasoline only. – Wipe up spilled fuel before starting the engine. – Close the tank tightly. SRP 2240 / 3860 User Manual ◄ 19...
Page 20
Danger Do not smoke in the working area; avoid open fire and sparks – fire and explosion hazard! Risk of eye injuries! – Wear safety goggles. 20 ► SRP 2240 / 3860 User Manual...
Page 21
Do not use your hand to check hoses for leaks as this could cause pressurized oil injection into body. • Detected faults are to be eliminated immediately. SRP 2240 / 3860 User Manual ◄ 21...
Page 22
If they are damaged, replace them immediately. With vibrating devices, it is important to check intermittently the screw connections for tightness. Pay attention to the tightening torque. 22 ► SRP 2240 / 3860 User Manual...
Page 23
Adjust the tension if necessary. Do not start the engine without V-belt guard. Danger of injuries. Danger • Check the tension of the V-belt after 25 op. hrs. again. Adjust the tension if necessary. SRP 2240 / 3860 User Manual ◄ 23...
Page 24
Care is to be taken with the draining of hot oil: Danger of scalding! Danger Collect oil which has run out or over- flowed and dispose it in an environment friendly manner. Environment • Screw-in oil drain screw (2). 24 ► SRP 2240 / 3860 User Manual...
• If the level is too low, top up with hydraulic fluid; if too high, drain off excess fluid. • With the machine running and the throttle lever in the «V» position, close locking screw (1). SRP 2240 / 3860 User Manual ◄ 25...
Insufficient V-belt tension Retention V-belt V-belt broken Replace V-belt Centrifugal clutch lining worn Replace linings and springs Too much oil in exciter Check exciter oil level Default in hydraulic system Contact a Stanley-service center 26 ► SRP 2240 / 3860 User Manual...