Nvidia 680i LT SLI User Manual page 65

IrDA and CIR Connectors
5
IRTX
Ground
IRRX
N. C.
VCC
1
IrDA CIR
Connect the cable connector from your IrDA module to the IrDA
connector (J5) or CIR connector (J14).
Note:
The sequence of the pin functions on some IrDA/CIR cable
may be reversed from the pin function defined on the system
board. Make sure to connect the cable connector to the IrDA/
CIR connector according to their pin functions.
BIOS Setting
Configure IrDA/CIR in the Integrated Peripherals submenu of the
BIOS.
Driver Installation
You may need to install the proper drivers in your operating system
to use the IrDA/CIR function. Refer to your operating system's
manual or documentation for more information.
5
CIRTX
Ground
CIRRX
N. C.
5VSB
1
Hardware Installation
2
65