Nvidia 680i LT SLI User Manual page 104

3
BIOS Setup
Soft-Off by PWRBTN
This field allows you to select the method of powering off your
system.
Delay 4 Sec.
Instant-Off
WOL(PME#) From Soft-Off
Set this field to Enabled to wake up the system via the onboard
LAN or via a LAN card that uses the PCI PME (Power Manage-
ment Event) signal to remotely wake up the system. Access to the
LAN card will cause the system to wake up. Refer to the card's
documentation for more information.
Power-On By Alarm
Enabled
Disabled
104
Regardless of whether the Power Management
function is enabled or disabled, if the power but-
ton is pushed and released in less than 4 sec, the
system enters the Suspend mode. The purpose
of this function is to prevent the system from
powering off in case you accidentally "hit" or
pushed the power button. Push and release again
in less than 4 sec to restore. Pushing the power
button for more than 4 seconds will power off
the system.
Pressing and then releasing the power button at
once will immediately power off your system.
When Enabled, you can set the time you would like the
Soft Power Down (Soft-Off) PC to power-on in the
"Time (dd:hh:mm) of Alarm" field. However, if the system
is being accessed by incoming calls or the network prior
to the time set in the field, the system will give priority
to the incoming calls or network.
Disables the automatic power-on function. (default).