Table of Contents
Advertisement
Following is the sequence of commands you would use to copy these files
and create this directory structure on the printer.
NOTE: This command sequence assumes it starts in the c:\ root
directory on both the printer and PC.
1. ucd d:
2. lcd app
3. put *.*
U C l i e n t C o m m a n d s
Following are the UClient commands.
Command
close
get
help
lcd
ldel
ldir
lmd
lrd
lwd
open
ping
put
putbios
puttrueffs
quit
reboot
Change the printer's directory from c:\ to d:\.
Change the PC's directory to c:\app.
Copy all of the files from c:\app (on the PC) to d:\ on
the printer.
Description
Closes the communication connection between the PC
and printer by taking the PC out of a ready state.
Copies a file from the printer to the PC.
Displays a list of available commands or help information
about a specific command.
Changes the directory on the PC.
Deletes a file on the PC.
Lists details about files and/or directories on the PC, as
specified.
Creates a directory on the PC.
Deletes a directory on the PC.
Displays the path to the current directory on the PC.
Puts the PC in a communications ready state.
Confirms that the open PC/printer connection is valid.
Copies a file from the PC to the printer.
Copies a BIOS binary file from the PC to the printer.
Copies a TrueFFS binary file from the PC to the printer.
Exits UClient.
Restarts the printer.
Using UServe and UClient 7-5
Advertisement
Table of Contents
