s c n S e t U P C E A N I n f o
Description
LMSSCNEN.LIB only. Saves the scanner configuration values
the application set in the UPCEANINFO data structure. See
"UPCEANINFO" in Chapter 5 for a description of this data
structure.
To configure the scanner, the application:
1. Enables the scanner with scnOpenScanner or
scnOpenScannerShared.
2. Calls scnGetUPCEANInfo.
3. Sets the values in the UPCEANINFO data structure.
4. Calls scnSetUPCEANInfo.
Syntax
short far scnSetUPCEANInfo(LPUPCEANINFO lprUPCEANInfo);
Parameters
lprUPCEANInfo
Return Values
0
-5
-9
4-92
Programmer's Manual
When the application disables the scanner,
the configuration values go back to the
A pointer to a UPCEANINFO data structure.
Successful.
Invalid configuration value.
The scanner is disabled.
defaults.