Electric Windows, Check Positioning - Volkswagen golf 5 Work Description

Description of work (part 1 of 2)
- Illuminate inner pad using an electric flashlight and
mirror.
- Determine thickness of inner pad by checking visually.
a - Pad thickness inner and outer, not including backing
plate
Wear limit: 2 mm
With pad thickness (not including backing plate) of 2 mm,
the brake pads have reached their wear limit and must be
replaced (repair procedure). Inform customer!
Note:
When replacing brake pads, it is absolutely
necessary to check brake discs for wear! Checking
and if necessary replacing brake discs is a repair
measure.
- Check brake disc for wear
Repair Manual, Suspension, Wheels, Brakes, Steering,
Repair Group 46, Rear brakes, servicing
6 speed Direct Shift Gearbox (02E), Oil and filter,
changing
Work procedure:
Repair Manual, 6 Spd. Direct Shift Automatic
Transmission 02E Front Wheel Drive, Repair Group 34,
.

Electric windows, check positioning

Note:
After disconnecting and reconnecting the battery, the
run-up and run-down function of the power window
regulators will not function. Therefore, the electric
windows must be positioned again immediately,
before a new vehicle is delivered. The vehicle
battery must not be disconnected after the electric
windows have been positioned.
Page 17 / 37