Table of Contents
Advertisement
ON/OFF SWITCH
The ON/OFF switch controls both the
worklight (Fig. 6) and the motor of the tool.
1.
To turn the rotary tool ON, press the
ON/OFF switch (2) once (Fig. 3).
NOTE: When the ON/OFF switch is
pressed once, the worklight will turn ON.
2.
When the worklight comes ON, press
the "+" speed button (4) and the tool
will start.
NOTE: The tool will always start at its
slowest speed.
CHANGING SPEEDS
1.
To increase the tool speed, press the
"+" speed button (4). Each time the "+"
button is pressed, the tool will
increase in speed to the next level.
2.
To reduce the tool speed, press the
"–" button (3). Each time the "–" button
is pressed, the tool will decrease in
speed to the next level.
NOTE: The speed indicator LED's
(5, 6 & 7) will indicate whether the tool is
running at slow, medium or high speeds.
When operating in the five slow speeds,
the green LED (5) will be ON. When
operating in the four medium speeds, both
the green and amber LED (6) will be ON.
When operating in the highest speed, the
green, amber and red LED (7) will be ON.
3.
To turn the tool OFF, press on the
ON/OFF button.
NOTE: Press the ON/OFF button a second
time to turn the worklight OFF. The
worklight will also turn OFF automatically
after approximately 30 seconds.
ASSEMBLY AND OPERATING
22
Fig. 7
Advertisement
Table of Contents
