Siemens 7SG11 Manual page 161

Software Release History
The software listed below is used in one of more types of Argus relay. The list of software revisions
applying to Argus 2, up to and including this document issue is:
Nov 2005 2434H80040 R8
July 2005 2434H80040 R7
Mar 2005 2434H80040 R6
Aug 2004 2434H80040 R5
April 2004 2434H80023 R6
Jan 2004 2434H80023 R5
Sep 2003 2434H80023 R4
Mar 2003 2434H80023 R3
Nov 2002 2434H80023 R2
Jun 2002 2434H80023 R1
Feb 2002 2434H80022 R3
Oct 2001 2434H80022 R2
Feb 2001 2434H80022 R1
Apr 2000 2434H80021 R6
Jan 2000 2434H80021 R5
Jul 1999 2434H80021 R4
May 1999 2434H80021 R3
Mar 1998 2434H80020 R1
Sep 1997 2434H80019 R4
Jul 1997 2434H80019 R3
Apr 1997 2434H80018 R2
Argus 2-5xx software release history
April 2434H80040 R4
2004
Jan 2004 2434H80040 R3
©2010 Siemens Protection Devices Limited
Highset and Lowset setting steps revised between 2.5xIn and 3.0xIn
ACD bit in IEC 60870 library corrected
CBF logic modified, timer will run while trip is being issued and I >
ICBF Level
Modification to "checking settings" screen at switch on. Corrected "CT
Failure" setting display
PRIMARY/SECONDARY Amps.
ASDU4 measurands return value 0 correctly.
Minor change: Min P/F, E/F settings now 0.05 x In
Additional features:
Additional features:
Minor change: IEC60870 Class 2 measurands
Additional features:
Minor change: DTL timers extended to 5 minutes
Minor change: Time synch via IEC870
Minor change: communications with ReyDisp
Minor change: power on alarm added
Additional features:
Additional features:
nd
Minor change: SEF 2
Additional features:
resettable instruments, output relay pulse length setting, 10 second
delay on trip test.
Additional features:
models).
Additional features:
Minor change: current meter averaging.
Minor change: status group select
Additional features:
Additional features:
Additional features:
Additional features:
characteristic angle available for E/F and SEF
Minor change: settings displayed in ReyDisp
Additional features:
added.
Additional features:
expanded I/O models).
Minor change: separate settings for P/F, E/F and SEF current
ratings.
Minor change: sum of I
First release
Minor change: Min P/F, E/F settings now 0.05 x In
Additional Features: Added CT Failure functionality
Maximum Demand Added for Ia, Ib, Ic, W, Vars
General Alarms added to scrolling fault screen
7SG11 Argus 2 Diagrams and Parameters
when configured
Modbus added
CT Failure function added
CBF Level detectors added
CB fail (all models).
external trip via status input.
stage can be disabled.
general alarms, status input inversion,
CB fail, trip circuit supervision (single-pole
New model variants
default instruments
new expansion board (8SI).
clock synchronisation using status input
new directional SEF model and -90°
status input pick-up and drop-off delays
CB fail, trip circuit supervision (all
2
setting range.
to show