Getting Started; Unpacking The Printer; Programming Information; Duty Cycle - Paxar 9430R Operator's Handbook Manual

Paxar printer operator's handbook
Table of Contents

Advertisement

G E T T I N G S TA R T E D
Operator's Handbook
Use this
Paxar Monarch Sierra Sport™ 3R 9430R Printer.
This three-inch printer works with various hosts using the
RS232 communications port. It also supports IrDA and
optional Bluetooth communications. See Appendix A,
"Specifications" for more information about IrDA and
Bluetooth. The 9430R printer can print text, bar codes,
and limited graphics on thermal direct receipt paper.
Use this manual to
charge the battery
load supplies
clean the printer
troubleshoot the printer.
U n p a c k i n g t h e P r i n t e r
The printer comes packaged with two rolls of supply (one
already loaded in the printer), a battery (included with
select printers), a belt clip, and a plug-in charger
(included with select printers).
P r o g r a m m i n g I n f o r m a t i o n
You may need to refer to the
included on the CD-ROM. It provides an explanation of
how to use the printer's command language.
D u t y C y c l e
The 9430R printer is designed to print up to 1000 inches
per day. The average print rate is 1 inch every 10
seconds at a text character print density of 25% (i.e., one
character printed out of every four positions). Bar codes
and graphics are more dense (print with more dots) than
text and may need a lower duty cycle. In high
temperature environments, pause the printer for one
minute after every four (4) inches printed. If the duty
cycle is exceeded, the printer may not print all of the
information that was sent to it.
with your
Programmer's Manual
1

Getting Started 1-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Monarch sierra spot 3r 9430r

Table of Contents