Table of Contents
Advertisement
Reading the LED
This table explains the LED
indicators.
LED Indicators
LED Indicators
Red or
Orange
Amber
Green
Status
On
The printer has an error and is not ready
to accept data.
On
The battery is charging at a fast rate. If
the battery voltage is below 5.0V, the
battery is "trickle" charged until the
battery reaches 5.0V.
Off
The battery is fully charged.
On
The printer is on and ready to accept
data.
If there is no activity for longer than
20-30 seconds, the printer goes into
sleep mode to conserve the battery.
Refer to the
change this time interval. The printer
"wakes up" when it receives any
information from the host or you press
the power (P) button.
With Bluetooth printers, the printer has
a mode where it can stay on all the time.
Programmer's Manual
to
Getting Started 1-5
Advertisement
Table of Contents
