Tearing Supply - Paxar Monarch HandiPrint 6017 Operating Instructions Manual

2. Drop the supply into the well. Make sure the supply
unwinds from the top as shown.
3.
Position the supply between the printhead guides.
Platen Roller
4.
Make sure some supply extends past the platen
roller.
5. Close the supply cover.
T e a r i n g S u p p l y
The printer's supply door acts as a tear bar. Tear down
against the tear bar to remove receipts.
The tear bar may have sharp edges.
Tear Bar
2-2 Loading Supplies
CAUTION
Printhead Guide