Paxar Monarch HandiPrint 6017 Operating Instructions Manual page 9

You can print while the battery is charging; however, the
battery may not receive a full charge.
You can also charge the handheld while it is connected to
the printer. However, the batteries (printer and
handheld) may not receive a full charge.
connected, you must have a battery
1.
Plug the cable into the socket located on the side of
the printer as shown (under the
2. Connect the angle plug into the AC power adapter.
3.
Plug the AC power adapter into an electrical outlet.
Charging time is approximately 1.5 to 3 hours.
To print with the AC power adapter
inside the printer.
It will take longer to charge the
battery if you are printing while
charging.
symbol).
Getting Started 1-5