Restraints - Honda Accord 4D 2003-2006 Owner's Manual

03/09/03 14:13:01 32SEA610_061
Protecting Children
ATTACHING CLIP
Front
ANCHOR FITTING
Attach the attaching clip to the
anchor fitting as shown in the
illustration, then tighten the strap
according to the child restraint
system maker's instructions. Make
sure the strap is not twisted.
The above illustration shows how
the attaching clip should be routed in
EU countries.
Remove the rear head restraint on
the seating position you want to use
58
Driver and Passenger Safety
(see page 126 ). The removed head
restraint should be secured so it will
not be thrown while you are driving.
Make sure to replace the rear head
restraint when the child restraint
system is not in use.
On some models
To use an anchor point, lift the rear
head restraint, then route the tether
strap over the seat-back between the
legs of the head restraint.
To attach the tether to the child
restraint system, follow the child
restraint system maker's instructions.
When the child restraint system is
used, follow the instructions that
came with the child restraint system.
Child restraint anchorages
WARNING:
are designed to withstand only those
loads imposed by correctly fitted child
restraints. Under no circumstances are
they to be used for adult seat belts,
harnesses or for attaching other items
or equipment to the vehicle.