Oil Check - Honda Accord 4D 2003-2006 Owner's Manual

Table of Contents

Advertisement

03/09/10 18:12:39 32SEA610_300
GRIP
CLIP
Petrol models
3.
Pull the support rod out of its clip
by holding the grip and insert the
end into the hole on the front right
side of the bonnet.
To close the bonnet, lift it up slightly
to remove the support rod from the
hole. Put the support rod back into
its holding clip. Lower the bonnet to
about 30 cm (a foot) above the
fender, then let it drop.
SUPPORT ROD
GRIP
Diesel models
On Diesel models
Do not press the engine cover
forcibly.
This may damage the engine cover
and component parts.
After closing the bonnet, make sure
it is securely latched.
Service Station Procedures

Oil Check

All engines consume oil as part of
their normal operation, therefore,
SUPPORT ROD
the engine oil level must be checked
regularly, for example when
refuelling. Always check the oil
before a long journey.
The amount of oil consumed
depends on how the vehicle is driven
and the climatic and road conditions
encountered. The rate of oil
consumption can be up to 1 Liter per
CLIP
1,000 km/625 miles. Consumption is
likely to be higher when the engine
is new.
Wait a few minutes after turning the
engine off before checking the oil
level, and always make sure the
vehicle is parked on level ground.
CONTINUED
297
Before Driving

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents