Honda Accord 4D 2003-2006 Owner's Manual page 421

03/09/03 15:08:14 32SEA610_421
Lights
PLASTIC
COVER
Diesel models
On cars with high voltage discharge
type low beam headlights
To replace a high beam headlight
bulb, follow the procedure of
replacing halogen type high beam
headlight bulb.
418
Maintenance
BULB WEATHER
SEAL
HOLD-DOWN WIRE CONNECTOR
Petrol models
Remove the electrical connector
2.
from the bulb by pulling the
connector straight back.
3. To replace a hologen type high
beam headlight bulb, remove the
rubber weather seal by pulling on
the tab.
BULB WEATHER
SEAL
HOLD-DOWN WIRE CONNECTOR
Diesel models
Unclip the end of the hold-down
4.
wire from its slot. Pivot it out of
the way and remove the bulb.
5. Insert the new bulb into the hole,
making sure the tabs are in their
slots. Pivot the hold-down wire
back in place, and clip the end into
the slot.