Clock Functions Table; Setting The Duration; Setting The Time Delay - Zanussi ZOB65922XU User Manual

Do not open the oven door during cooking.
7. Turn the knob for the heating functions to the
off position, press Plus Steam
oven.
The indicator turns off.
8. Remove water from the cavity embossment.
CLOCK FUNCTIONS

CLOCK FUNCTIONS TABLE

Clock function
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MINDER
SETTING THE TIME. CHANGING THE TIME
You must set the time before you operate the oven.
The flashes when you connect the appliance to
the electrical supply, when there was a power cut
or when the timer is not set.
Press the or to set the correct time.
After approximately five seconds, the flashing stops
and the display shows the time of day you set.
To change the time of day press
again until starts to flash.

SETTING THE DURATION

1. Set an oven function and temperature.
2. Press again and again until
flash.
3. Press or to set the DURATION time.
The display shows
4. When the time ends,
acoustic signal sounds. The appliance
deactivates automatically.
5. Press any button to stop the acoustic signal.
10
to turn off the
To set, change or check the time of day.
To set how long the appliance operates.
To set when the appliance deactivates.
To combine DURATION and END function.
To set countdown time. This function has no effect on the opera-
tion of the appliance. You can set the MINUTE MINDER at any
time, also when the appliance is off.
again and
starts to
.
flashes and an
WARNING! Make sure that the
oven is cold before you remove
the remaining water from the
cavity embossment.
Application
6. Turn the knob for the oven functions and the
knob for the temperature to the off position.
SETTING THE END
1. Set an oven function and temperature.
2. Press again and again until
flash.
3. Press or to set the time.
The display shows
4. When the time ends,
acoustic signal sounds. The appliance
deactivates automatically.
5. Press any button to stop the signal.
6. Turn the knob for the oven functions and the
knob for the temperature to the off position.

SETTING THE TIME DELAY

1. Set an oven function and temperature.
2. Press again and again until
flash.
3. Press or to set the time for DURATION.
4. Press .
5. Press or to set the time for END.
starts to
.
flashes and an
starts to