Changing The Programme Sequence; Changing A Programme While It Is Running; To Cancel A Programme; To Interrupt A Programme - Miele T 4453 C Operating Instructions Manual

Changing the programme sequence

Changing a programme while it
is running
You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations). However, you can still
select or deselect the buzzer and
anti-crease.
You will need to cancel the current
programme before you can select a
new one.

To cancel a programme

^ Press the Start/Stop button.
The Start/Stop indicator will then start
flashing instead of being on constantly.
The flashing indicates that a new
programme can be selected.
^ Select a different programme by
pressing the e or - buttons.
^ Select any Extras required.
^ Select a drying level (only for
programmes with drying levels).
To continue drying
^ Press the Start/Stop button.

To interrupt a programme

^ Switch the dryer off with the
I-On/0-Off button.
To continue drying
^ Switch the dryer back on with the
l-On/0-Off button.
The programme will continue, as long
as the cooling down phase has not
been reached.
22
Adding or removing laundry
after a programme has started
^ Press the Door button.
^ Open the door.
,
Do not touch the back of the
drum when adding or removing
items. The drum could be very hot -
danger of burning.
^ Add or remove items.
^ Close the door.
To continue drying
^ Press the Start/Stop button.
The programme will continue, as long
as the cooling down phase has not
been reached.
The time left shown in the display may
now vary from the actual drying time.