Advertisement
The display should now show VT St1b as shown in the picture below. This indicates Valve Type
5600 Mode) Do not change this value, and press the Extra Cycle Button once to continue.
The display should now show CT / Fd as shown in the picture below. This indicates Control
Type Meter Delayed. Do not change this value, and press the Extra Cycle Button once to
continue.
The display should now show NT - - - 1 as shown in the picture below. This indicates number
of tanks is single. Do not change this value, and press the Extra Cycle Button once to
continue.
Page 9 of 14
Copyright © 2009 Quality Water Treatment, All right reserved.
rev. 10.29.09
www.qualitywatertreatment.com
Advertisement
