Advertisement
The display should now show BW 10 as shown in the picture below. This indicates Backwash
Time is 10 minutes. Do not change this value, and press the Extra Cycle Button once to
continue.
The display should now show BD 60 as shown in picture below. This indicates Brine Draw Time
is 60 minutes. Do not change this value, and press the Extra Cycle Button once to continue.
The display may now show RR 10 as shown in picture below. This indicates Rapid Rinse Time is
10 minutes) Do not change this value, and press the Extra Cycle Button once to continue if
this value is different, use the UP or DOWN buttons to change it.
Page 12 of 14
Copyright © 2009 Quality Water Treatment, All right reserved.
rev. 10.29.09
www.qualitywatertreatment.com
Advertisement
