Accessories(Optional) - Teufel Theater 4 Hybrid Series Technical Specifications And Operating Manual

Accessories (optional)
Theater 4 Hybrid EX set
With an additional "EX
set" , you can expand your
Theater 4 Hybrid 5.2 sys-
tem into a 7.2 system that
takes full advantage of a
7.1 AV receiver. The EX set consists of two addi-
tional M 420 R speakers that are placed behind
the listening spot and between the two rear side
speakers(see page 10).
Y adapter
1 x connector to 2 x socket.
This cable adapter splits
the mono Sub Out of an AV
receiver into two signals.
This is necessary if you are
running two subwoofers,
such as those contained in the M 420 F boxes.
Without a Y adapter, you will not be able to run
both the subwoofers in your Theater 4 Hybrid
system.
Teufel NF mono cinch cable
This cable is designed for
connecting active subwoof-
ers to AV receivers/amplifi-
ers, and it is shielded against
magnetic interference. A re-
liable connection is guaran-
teed by sturdy, gold-plated connectors. The cable is
available in set lengths between 2.5 and 15 metres.
Note that the Theater 4 Hybrid system requires two
of these cables.
Teufel satellite spikes
These solid spikes, offered in
a set of four, are for lifting
the M 420 F subwoofer/sat-
ellite speaker off the floor.
This prevents unwanted bass
resonances in the floor. The
set consists of four spikes,
four anchor nuts, one allen
key, four pad rings for protecting the floor surface,
and four distance rings for compensating any un-
evenness in the surface.
Teufel speaker cable 2 x 2.5 mm
Highly flexible copper core
(650 strands) with a trans-
parent sleeve and polarity
markings. The 2 x 2.5 mm
cable can be used for cable
distances up to 15 metres. For longer distances,
we recommend the thicker 2 x 4 mm
response to customer demand, our cables are now
pre-wired for lengths between 10 and 50 metres.
Teufel speaker cable 2 x 4 mm
Hundreds of ultra-thin,
low-oxygen copper wires
(protected by a thick, flex-
ible, transparent plastic
sleeve that withstands al-
most any stress) ensure that your audio signals
are passed to the speakers cleanly and without
being compromised by underdimensioned ca-
bling. Our cables are pre-wired for practical usage
lengths between 10 and 50 metres.
M 310 P "Caesar" speaker stand
This elegantly curved spea-
ker stand features a stur-
dy metal bracket and a
solid glass plate base. It is
designed for the centre and
rear speakers of the The-
atre 4 Hybrid system. The
speaker cable is discretely
concealed inside the stand.
2
2 -
-cable. In
2
2
If you require any optional
accessories, you can easily
order these directly from the
Accessories section of our
online store:
www.teufel.eu
Teufel · Theater 4 Hybrid
7