Accessories (Optional) - Teufel system 4 Operating Manual

Accessories (optional)

Optional accessories for the System 4 set
Teufel offers the following accessories for your
System 4:
System 4 EX set
If you own a 7.1 AV receiver,
you can purchase a "5.1
ĕ 7.1" EX set to expand
your System 4 loudspeaker
setup into a full-blown
7.1 system. The EX set
consists of two additional
M 450 FCR speakers, to be mounted centrally be-
tween the side rear speakers (see page 11).
Teufel speaker cable 2 x 2.5 mm
Highly
core (650 strands) with a
flexible sleeve and polar-
ity markings. The 2 x 2.5
mm 2 cable can be used
for cable distances up to 15 metres. For longer
distances, we recommend the thicker 2 x 4 mm
cable. In response to customer demand, all our
audio cables are now pre-wired for typical usage
lengths.
Teufel speaker cable 2 x 4 mm
Hundreds of ultra-thin,
low-oxygen copper wires
(protected by a thick, flex-
ible, plastic sleeve that
withstands
stress) ensure that your audio signals are passed
to the speakers cleanly and without being com-
promised by underdimensioned cabling.
Teufel NF mono RCA cable
This cable is designed for
connecting active subwoof-
ers to AV receivers/amplifi-
ers, and is shielded against
magnetic interference. A
reliable connection is guaranteed by sturdy, gold-
plated connectors. This cable is available in sever-
al different lengths (2.5 to 15 metres) to perfectly
match your requirements.
Y adapter
1 x socket to 2 x connector.
A Y adapter lets you feed
a mono sub signal to both
of the subwoofer's stereo
inputs; this increases the
subwoofer's overall volume.
M 620 P speaker stand (black)
screws – the speaker is securely fastened to the
stand. At a stand height of 68 cm, the FCR sat-
2
ellite speakers are automatically placed at the
flexible copper
proper surround system height.
Please note that this stand is not suitable for
the M 450 D satellite speakers – dipole speakers
should always be wall-mounted.
Teufel banana plugs
2
2
to 4 mm in diameter. Low-resistance plug connec-
almost any
tions are ensured by flexible spring contacts and
solid gold plating. Banana plugs are sold in pairs
only, marked red and black respectively. The System
4 loudspeaker set requires 10 banana plugs for a
5.1 setup, or 14 for a 7.1 setup.
The M 620 P has a black
base mount and was
designed to aestheti-
cally match the System 4
speakers. The stand's two
sleek columns seem to
make the speaker float in
mid-air. Thanks to the es-
tablished Teufel speaker
mounting method – inte-
grated fittings and packing
These high-quality, multi-
purpose speaker connectors
from Teufel are an affordable
option to ensure faultless
connections between your
loudspeakers and ampli-
fier/receiver. The rugged ba-
nana-design screw connec-
tor securely holds cables up
If you require any optional
accessories, you can easily
order these directly from the
Accessories section of our
online store:
www.teufelaudio.com
7
· System 4