Setting Up Your Camera; Pre-Installation Checklist; Setting Up Your Housing; Opening The Housing - Ikelite 6910.63 Instruction Manual

Setting Up Your Camera

Pre-Installation Checklist

1. Insert a fully charged camera battery.
2. Insert a properly formatted memory card.
3. Set Smile/Face Det. to OFF.
4. Set FINDER/MONITOR to Monitor.
5. Set ISO to ISO AUTO or a specific ISO setting. Do not use ISO
AUTO Multi Frame NR setting if using a flash. This setting will
prevent the flash from firing.
ISO
ISO
AUTO
AUTO
100
200
400

Setting Up Your Housing

Opening the Housing

1. Push the lid snap lock forward and start to lift the curved end away
from the housing.
Multi Frame Noise Reduct.
ISO
AUTO
7