Advertisement
Advertisement
Related Manuals for Audio Physic Virgo 25 plus
Summary of Contents for Audio Physic Virgo 25 plus
- Page 1 plus VIRGO 25 Owner´s Manual...
-
Page 2: Table Of Contents
Contents Included in the Delivery page 3 Welcome page 12 General Tips page 13 Unpacking and Assembly page 14-15 Connecting the Loudspeakers / Bi-Wiring Operation page 16 Setting Up the Loudspeakers page 17-18 Technical Specifications page 19... -
Page 3: Included In The Delivery
Your new loudspeakers are delivered in two separate boxes. One box contains one loudspeaker and the accessory pack “1“, as well as your “Welcome to the Audio Physic Family“ package containing this Owner‘s Manual and the Final Inspection Certificate. In the second box you will find the other loudspeaker and a further accessory pack (number “2“). -
Page 4: Welcome
AUDIO PHYSIC loudspeakers in the comfort of your own home. As a rule, your competent AUDIO PHYSIC dealer will deliver and install your loudspeakers. If you would rather install your product yourself, the following pages provide you with detailed tips and plus steps to follow in order to safely set up your loudspeakers. -
Page 5: General Tips
The drivers in this range of AUDIO PHYSIC loudspeakers use a unique mounting technique. Rather than directly mounting the drivers onto the cabinet of the loudspeaker, the drill holes contain special neoprene plugs. -
Page 6: Unpacking And Assembly
Unpacking and Assembly Place the boxes on the floor, making sure that the product labels are facing up. Carefully open the packaging on the long side where it has been taped up, as shown in the illustrations below (illustration similar), preferably using a pocket knife or kitchen knife. Correct: In order to correctly False: If the top of the unpack the loudspeaker, the top of... - Page 7 You can find tips regarding this process in the following chapter on “Setup” and can access particularly detailed information on the AUDIO PHYSIC website. If you want to increase the sound quality even more in terms of precision and bass response, try out our high-quality VC feet (for example VCF II Double M8 in the image on the right) on your loudspeakers.
-
Page 8: Connecting The Loudspeakers / Bi-Wiring Operation
Connecting the Loudspeakers Please switch off all equipment in your HiFi system before you begin to connect your loudspeakers. Attach the loudspeaker cable to the connectors on the loudspeakers. When doing so, please make sure that you have the right polarity. As a rule, loudspeaker cables are accordingly labelled, either by a permanent marking on one of the two conductors of the cable or by plus “+”... -
Page 9: Setting Up The Loudspeakers
Setting Up the Loudspeakers The ideal placement of your loudspeakers in your room involves positioning them in an isosceles triangle arrangement including your listening seat, creating equal spacing between each loudspeaker and the listening position. The distance between the loudspeakers should be around 0.8 - 1.2 times as much as the distance between the loudspeakers and the listening position. - Page 10 Alongside the strength of the bass response, the distance from the side walls also particularly affects the localisation of sound events and therefore the precision of the spatial imaging. As the distance from the walls increases, the localisation will become more precise and the sound will be more balanced.
-
Page 11: Technical Specifications
plus Technical Specifications VIRGO 25 Height 41.5“ 9.1“ Width 15.7“ Depth 14.7“ x 18.5“ Required Space: Width x Depth 71 lbs. each Weight 30 - 180 watts Recommended amplifier power 4 Ohm Impedance Frequency range 30 Hz - 40 kHz Sensitivity 89 dB Loudspeaker systems... - Page 12 AUDIO PHYSIC GmbH Distributed in North America by: Almerfeldweg 38 VANA, Ltd. 59929 Brilon / Deutschland 2845 Middle Country Road Lake Germany Grove, NY 11755 (631) Tel. +49(0)2961/9617-0; Fax +49(0)2961/51640 246-4412. info@audiophysic.de / www.audiophysic.de www.vanaltd.com...