Charging The Battery; Bluetooth Pairing - Hama FREEMAN X6 Operating Instructions Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 11
• Do not use the product in heavy
rain, under water, in the shower or
for water sports, etc.

4.1 Charging the battery

Warning – Rechargeable
battery
• Only use suitable charging
devices with USB connections for
charging.
• As a rule, do not use charging
devices or USB connections that
are defective and do not try to
repair them yourself.
• Avoid storing, charging or using
batteries in extreme temperatures.
• When stored for a long period of
time, batteries should be charged
regularly (at least every three
months).
• Charge the speaker fully before using it
for the first time.
• Connect the included charging cable to
the speaker's AUX input (9).
• Connect the unused connector on
the charging cable to a suitable USB
charger. Please refer to the operating
instructions for the USB charger used.
• The function button
flash in blue. The number of flashes
provides information about the
battery's charging status:
1x » 0-25 % battery level
2x » 26-50 % battery level
3x » 51-75 % battery level
4x » 76-100 % battery level
• If the battery is fully charged, the
function button
(3) lights up constantly in blue.
Note – Charging
• It takes approx. 5 hours to
completely charge the product.
• The speaker's battery can be
charged whether the speaker is
on or off.
• The actual battery life varies depending
4.2 Switching the product on
• Press and hold the function button
• The other function buttons flash in red.
(3) starts to
5. Bluetooth
5.1 Bluetooth
• If the battery capacity is less than
10%, the speaker will emit two
acoustic signals. You will only
receive this information if the
speaker is on.
• Depending on the terminal device
connected ( Bluetooth
speaker's battery level will appear
on the device.
on use of the device, the settings and
the ambient conditions (rechargeable
batteries have a limited service life).
and off
(4) for about 3 seconds to switch the
speaker on or off. An acoustic signal
will sound and the function button
(3) will start to flash in blue. The
number of flashes provides information
about the battery's charging status:
1x » 0-25 % battery level
2x » 26-50 % battery level
3x » 51-75 % battery level
4x » 76-100 % battery level
Note – Automatic
shutdown
Note that the speaker will
automatically switch off after 30
minutes without action (no audio
playback/no Bluetooth
®
pairing
®
Note
• Check whether your mobile device
(MP3 player, mobile phone, etc.) is
Bluetooth
capable.
®
• If not, you can only use the
speaker for playback using the
included audio cable.
), the
®
function).
®
11

Advertisement

Table of Contents
loading

Table of Contents