Table of Contents
Advertisement
The pair of 2173R and 2173 models work together to create a transparent
extension between two peered Ethernet LANs. Figure 1 shows a typical
point-to-point application.
CAUTION
To install the 2173R Ethernet Extender, do the following:
1. Connect the line interface between the units (refer to section 3.1,
"Connecting the Twisted-Pair Line Interface" on page 10)
Note
See Figure 2 for the standalone unit's rear panel arrangements.
2. Connect the Ethernet interface (refer to section 3.2, "Connecting the
10/100Base-T Ethernet Interface" on page 11).
3. Connect the power plug (refer to section 3.3, "Connecting Power" on
page 12).
Figure 1. Typical application
3.0 INSTALLATION
The Interconnecting cables shall be acceptable for
external use and shall be rated for the proper applica-
tion with respect to voltage, current, anticipated tem-
perature, flammability, and mechanical serviceability.
9
Advertisement
Table of Contents
