Safety Instructions And Regulations - Kaco Powador 1501xi Operating Instructions Manual

Sec tio n 2 · Sa fe ty Instructi ons a nd R eg ula t ion s
2 Safety Instructions and
Regulations
Standards and regulations
IEC 60364-7-712-2002:
Requirements for special installations or locations – Solar
photovoltaic (PV) power supply systems.
Technical rules
The installation must be suited to the on-site conditions and
comply with local regulations and technical rules.
Accident prevention regulations
The inverter must be installed by an authorised, skilled
electrician who is approved by the supply grid operator. The
electrician is responsible for observing existing standards and
regulations.
The proper and safe operation of this unit requires proper
transportation, storage, assembly and installation, as well as
careful operation and maintenance.
Only authorised electricians who have read and fully under-
stood all of the safety instructions contained in these operat-
ing and installation instructions, as well as other instructions
concerning assembly, operation and maintenance, may work
on this unit.
When this unit is operating, certain parts of the unit unavoid-
ably carry hazardous voltages, which can lead to death or
serious bodily injury. The precautions listed below must be
followed in order to minimise the risk of death or injury.
–
The unit must be installed in compliance with safety regula-
tions, as well as all other relevant national or local regula-
tions. To ensure operational safety, proper earthing, conduc-
tor dimensioning and appropriate protection against short
circuiting must be provided.
–
All covers on the unit must remain closed during opera-
tion.
–
Prior to performing any visual inspections or maintenance
work, ensure that the power supply has been switched off
and is prevented from being inadvertently switched back on.
If measurements must be taken while the power supply is
switched on, never touch the electrical connections. Remove
all jewellery from your wrists and fi ngers. Ensure that the
testing equipment is in good and safe operating condition.
–
When working on the unit while it is switched on, stand
on an insulated surface, ensuring that there is no earthed
connection.
–
Follow the instructions contained in these operating and
installation instructions exactly, and observe all danger,
warning and caution information.
Installation Instructions Powador 1501xi/2501xi*/3501xi/4501xi/5001xi**_EN
This list does not constitute a complete listing of all meas-
ures required for the safe operation of the unit. Contact your
specialty dealer if any specifi c problems arise which are not
suffi ciently covered for the purposes of the buyer.
Modifi cations
It is generally not permitted to make changes to the inverter.
Changes to the surroundings of the inverter are only permitted
if they comply with national standards.
Risk of damage due to improper modifi cations.
Never modify or manipulate the inverter or other
components of the system.
Transportation
The inverter is subjected to extensive testing and inspections
in our test fi eld. This is how we ensure the high quality of our
products. Our inverters leave our factory in proper electrical
and mechanical condition. Special packaging ensures safe and
careful transportation. However, transport damage may still
occur. The shipping company is responsible in such cases.
Thoroughly inspect the inverter upon delivery. Immediately
notify the responsible shipping company if you discover any
damage to the packaging which indicates that the inverter
may have been damaged or if you discover any visible damage
to the inverter.
If necessary, KACO new energy GmbH will assist you. Damage
reports must be received by the shipping company in writing
within six days of receipt of the goods.
CAUTION
Page 5