Appendix 1. Svc Inspection Mode; Dmt800, Dmt610, Dmt350 Series - Samsung DMT SERIES Service Manual

Appendix 1. SVC Inspection Mode

1. DMT800, DMT610, DMT350 Series

# How to Enter SVC Inspection Mode for DMT800 / 610 / 350
- Press the 'Heavy' + 'Delicate' + 'Power' buttons at the same time for two seconds
to enter Service Inspection Mode.
- All LEDs are displayed for the first two seconds and then Software-Ver. will be indicated.
- You can change the mode by pressing the Normal button again.
If press the Normal button in this mode, the mode will be changed to next mode.
- If you want to activate a mode while operating the dishwasher, the door must be closed.
- If 'LE' , 'OE', 'tE' error occur, enter Service Inspection Mode after resolving it.
- Service Inspection Mode is described in the following page.
0 64269#0